Shaikh afroz Fatima Muneeruddin |
||||||||
| Spectral Density Oriented Feature Coding For Pattern Recognition Application | ||||||||
The significant of multi spectral band resolution is explored towards selection of feature
coefficients based on its energy density. Toward the feature representiaon in transformed domain, multi wavelet
transformations were used for finer spectral representation. However, due to a large feature count these features
are not optimal under low resource computing system. In the recognition units, running with low resources a
new coding approach of feature selection, considering the band spectral density is developed. The effective
selection of feature element, based on its spectral density achieve two objective of pattern recognition, the
feature coefficient representiaon is minimized, hence leading to lower resource requirement, and dominant
feature representation, resulting in higher retrieval performance.
Spectral features, spectral density feature selection, pattern recognition, retrieval accuracy.
[1]. Te-Wei Chiang, Tien-Wei Tsai, "Content-Based Image Retrieval via the Multi-resolution Wavelet Features of Interest", Journal of Information Technology and Applications Vol. 1 No. 3, December, 2006 [2]. Vinayak D. Shinde, Vijay M. Mane, " Pattern Recognition using Multilevel Wavelet Transform",
International Journal of Computer Applications, Volume 49– No.2, July 2012.
|
Manisha Gunturi, M.Srinivasa Reddy |
||||||||
Micro Level Analysis of Stabilized Expansive Soil |
||||||||
An effort is made to stabilize the expansive soils with the addition of chemical additive at different
curing periods & different quantities of additive. Apart from Index and Engineering properties, Chemical
composition, XRD and SEM analysis were conducted on both untreated and treated soil sample. The test results
of the engineering properties were compared with the chemical and micro level analysis to get a better
understanding.
SEM, UCS,CBR, XRD.
[1]. BibhaMahto, A.K.Duggal (2015), "Improvement of Subgrade by RBI Grade 81 and Pond Ash",
International Research Journal of Engineering and Technology (IRJET), Vol 2, Issue 5, August. [2]. Chen, F.H. (1988). "A book Foundations on Expansive Soils', 2nd Ed., Elsevier Scientific Publishing Co., Amsterdam, The Netherlands. [3]. IS: 1498-1970, "Classification and identification of soils for general Engineering purposes", Bureau of Indian Standards, New Delhi. [4]. IS: 2720 (Part I) - 1983, "Methods of Test for Soil - Preparation of Dry Soil Sample for Various Tests", Bureau of Indian Standards, New Delhi.
|
||||||||
Ismail Zejnilović |
||||||||
BIM, Adoption, Implementation and Future |
||||||||
Building industry becomes more and more competitive for all participants. Recent trends in
building industry considering sustainability, material life cycle assessment, improving of building performance,
building management system, changes in risk analysis and holistic integrative approach to design. Creation of
BIM as a kind of process toll is in line of new demands and challenges.
Using BIM became synonymous to more efficient, better quality of work and better financial effects in all of
activities related to the construction industry in general...........
BIM, implementation, obstacles, legal framework, standards, future.
[1]. Deke Smith, Journal of Building Information Modelling-JBIM, 2007, page 12
|
||||||||
R.D. McLeod, M.R. Friesen, J.D. Edgerton, C.J. Fries |
||||||||
Mobile Apps for Mental Health: Overview and a Social Gaming Framework |
||||||||
This paper reviews current research on the role of Smartphones and similar technology play in
mental health and mental health maintenance, promotion, and assessment. The first section overviews the
current state of the art concerning the role Smartphones may play as tools for mental health in general. The
second part reviews one of the more promising Smartphone application areas related to social gaming and
gambling addiction and related mental health issues. This is followed by a section that presents a prototype
Smartphone app for data collection related to social gaming behaviours and their potential relevance to gaming
and gambling addictions.................
Mobile apps, Mental Health, Social Gaming/Gambling, Data collection for behavioural
inference.
[1]. Luxton, D. D., McCann, R. A., Bush, N. E., Mishkind, M. C., &Reger, G. M. (2011). mHealth for
mental health: Integrating Smartphone technology in behavioral healthcare. Professional Psychology:
Research and Practice, 42(6), 505.
|
||||||||
V.Jyothi, M. Gopi Krishna, B. Raveendranadh, Debashree Rupalin |
||||||||
IOT Based Smart Home System Technologies |
||||||||
The IoT allows objects to be sensed and/or controlled remotely across existing network
infrastructure, creating opportunities for more direct integration of the physical world into computer-based
systems. It results improved efficiency, accuracy and economic benefit in addition to reduced human
intervention. On the other hand, IoT systems could also be responsible for performing actions, not just sensing
the things. Intelligent Shopping systems, for example could monitor specific users purchasing habits in a store
by tracking their specific mobile phones. Other applications that the Internet of Things can provide enabling
extended home security features and home automation. This paper relates smart home or home automation
which induce technology for home atmosphere which is usage to provide ease and protection to its occupants.
Calorific value, wastes, moisture, energy generation, environment.
[1]. G. Kortuem, F. Kawsar, D. Fitton, and V. Sundramoorthy, "Smart objects as building blocks for the
internet of things," Internet Computing, IEEE, vol. 14, pp. 44-51, 2010.
|
||||||||
Anja Gräff, Rupert Palme, Hannes Petermeier, Manfred Höld, Jörn Stumpenhausen, Heinz Bernhardt |
||||||||
Assessing Adrenocortical Activity in Dairy Cows During Simulated Power Cuts in Milking Robots |
||||||||
The effects of unsteady electricity supply (power cuts) to an automatic milking system (AMS)
on cattle behaviour caused by load management, are crucial for the success of the future farming technologies
summarized by ―Integrated Dairy Farming –Stable 4.0‖. The influence of simulated power cuts on
adrenocortical activity was assessed by a non-invasive stress monitoring method determining faecal cortisol
metabolites (FCM).
This study was carried out on four commercial dairy farms in Bavaria, Germany, from March to August 2014.
All farms were using 1 Lely AMS for about 60 dairy cows. 12 adult Fleckvieh, aged from 2 to 8 years (average
3.9) were randomly selected per farm............
Automatic milking system, faecal cortisol metabolites, milk yield, Stable 4.0, stress.
[1]. Bertulat, S.; Fischer-Tenhagen, C.; Suthar, V.; Möstl, E.; Isaka, N.; Heuwieser, W. (2013):
Measurement of fecal glucocorticoid metabolites and evaluation of udder characteristics to estimate
stress after sudden dry-off in dairy cows with different milk yields. Journal of Dairy Science 96 (6),
3774–3787. DOI: 10.3168/jds.2012-6425.
|
||||||||
Ralph Schacht, Sven Rzepka |
||||||||
Parametric Transient Thermo-Electrical PSPICE Model For A Single And Dual Conductor Power Cable |
||||||||
A parametric macro model for a single and dual conductor power cable for transient
thermo-electrical coupled simulation in PSPICE will be derived. The articledepicts the modelling of a simplified,
single- and dual conductor cable and its use during simulation. Its verification against experiment and finite
element simulation shows a good agreement. The derived single- and dual conductor PSPICE cable macro model
enables a quick modelling at system level. It offers a time saving transient thermo-electrical simulation under
various thermal conditions and cable geometries and to optimize e.g. size, weight. The approach support the
engineer to overlook the thermal influences and temperatures along the power cable under real 'thermal'
assembling conditions in an e.g. car engine room or aircraft.
Multi conductor power cable;coupledelectro-thermal macro model; transient, PSPICE
[1]. MiticIustinianNeac, Andreea Maria Neac, An Example of SPICE Modeling for Electrothermal
Phenomena, Annals of the University of Craiova, Electrical Engineering series, No. 32, 2008; ISSN
1842-4805
|
||||||||
Neelofer Afzal |
||||||||
Hardware Implementation of Fuzzy Processors: A Review |
||||||||
A review paper on the various VLSI architectures of fuzzy logic based processors and
controllers is presented over here. The focus of this paper on the study of low power VLSI implementation of
fuzzy processors to result in reduced silicon area, high operating speed and the adaptability to various
application domains. The paper reviews the design and implementation of different components of a fuzzy logic
processor, like fuzzifiers, defuzzifiers, inference engine and rule base systems. It is been found that there is a
huge scope for further improvement of these components of fuzzy processor in terms of power, speed, area and
complexity in these fuzzy processors. It has been found that the researchers generally focus on the design and
development of inference engine and defuzzification units in a fuzzy processor due to their complex nature.
The further optimization in these blocks can result in a in a significant improvement in the overall performance
of the fuzzy processors.
Design, defuzzifiers, fuzzy logic, inference engine, low power designing.
[1]. L. A. Zadeh, "Fuzzy logic," IEEE Computer, vol. 1, no. 4, pp. 83-93, 1988.
|
||||||||
N. Afzal |
||||||||
Digitally Programmable Versatile Grounded Multiplier Using CCII |
||||||||
A novel digitally programmable grounded versatile multiplier is presented. It uses second
generation current conveyor and a digital control module. The new grounded versatile multiplier can provide
digital control to grounded impedance functions such as, resistor, capacitor, inductor without quantizing the
signal. The technique used is simple, versatile as well as compatible for microminiaturization in contemporary
IC technologies. The simulation results on digitally programmable versatile impedance multiplier verify the
theory.
Current conveyors; multiplier
[1]. Wilson, B., 1992. Tutorial review: Trends in current conveyors and current mode amplifier design. Int.
|
||||||||
M.H. Gulzar |
||||||||
On the Zeros of A Polynomial Inside the Unit Disc |
||||||||
In this paper we find the number of zeros of a polynomial inside the unit disc under certain
conditions on the coefficients of the polynomial.
Mathematics Subject Classification: 30C10, 30C15
Coefficients, Polynomial, Zeros
[1]. K.K.Dewan, Extremal Properties and Coefficient Estimates for Polynomials with Restricted
Zeros and on Location of Zeros of Polynomials, Ph.D Thesis IIT Delhi,1980.
|
||||||||
Version - 2 (February 2017) |
Monusinghchauhan, Ganesh Khandoori, M M Bahuguna |
||||||||
Comparative Study of Heat Transfer Enhancement in Rectangular And Interruped Louvered Fins (Newly Designed) in Internal Combustion Engine Using Cfd Tool |
||||||||
To increase the heat transfer rate of heat exchanger through fins in compact regionthe louvered
interrupted plate fins has designed for increasing fins surface area. FLUENT and Multi-physics software are
used in order to develop a 3-D numerical model for investigation ofinterrupted louvered fins. ILF analyzed by
CFD tool, on the basis of geometrical parameters the compact relationship for Nusselt Number exhibits
enhancement of thermal performance. Fin-plate weight reduces while surface area increases. Air is taken as the
working fluid andThe flow regime is assumed to be turbulence..............
force convection air cooling; thermal management; heat transfer; fluid flow; CFD Modling
heatsink design; radiator modeling. Interrupted Louvered Fins (ILF)
[1]. MukeshDidwania, Gopal Krishna and Ravikant 2013 Study and Analysis of Heat Transfer through
|
||||||||
Kruthi Jayaram |
||||||||
Hardware Implementation of Steam Power Plant |
||||||||
There is a silent revolution throughout the world in energy sector. There is a trend towards decentralized and distributed generation of renewable energy. The steam power plants are highly capital intensive and suitable for generation of electricity. The work of establishing the steam power plant is really revolutionary and it will create history of total change of transforming highly centralized capitalist tool beneficial to the entire world. Steam power plant consists of Boiler, Turbine and generator which can be used for electrification of village and community. Steam power can be used directly exhaust steam of the steam turbine can be used for heating in the process..................
Generation, Boiler, Turbine, DC motor
[1]. The control of boiler Instrument society of America 1991 by sam G. DUKE
|
||||||||
Ali Haghi, Hamid Simorgh |
||||||||
Improving Fault Ride ThroughCapabilities For Offshore PMSG Wind Farms Connected To VSC-HVDC Transmission System |
||||||||
Fault ride through (FRT) is one of the most dominant grid connection requirements to be met by
Wind Energy Conversion Systems (WECS). In occurrence of grid voltage dips, a mismatch is produced
between the generated active power and the active power delivered to the grid. Fault ride through necessity
demands management of this mismatch, which is a challenge for the WECS. Considering the development of
full scale converter based wind turbine generators (WTG), use of unit rated DC controlled resistors for each of
the full scale AC-DC-AC converter system of the individual turbines has been proposed instead of the one on
the high voltage direct current (HVDC) line side. In this paper, both the cases have been simulated and their
performances are found to be similar. Thus, it justifies that the DC resistors in the full scale converters are
sufficient to handle the FRT conditions.
Voltage sag, DC over-voltage, Fault ride through, Wind farms, VSC-HVDC.
[1]. Global wind energy council. http://www.gwec.net/global-figures/graphs/, 2015.
|
||||||||
Chitra A. Parmar, Sunil P. Khachane |
||||||||
Enhanced Conditional Privacy Preservation In VANETs |
||||||||
The Vehicle drivers (users) do not want their personal information such as vehicle names, license
plate, speed, positions, moving routes, and user information to be revealed, in order to protect them against any
illegal tracing or user profiling. Thus, this information must be protected from any kind of misuse or attacks.
For this the obscurity of vehicular nodes should be supported to preserve privacy of vehicles and their users.
Also, we should be able to investigate for accidents or liabilities from non-repudiation. Hence, we present an
enhanced conditional privacy preservation scheme for vehicular ad-hoc networks (VANETs). This scheme
includes an ID-based cryptosystem to assure user's obscurity using pseudonyms; however the model provides a
backdoor for authorities to track misbehaving and suspicious users.
Conditional Privacy, Identity-Based Cryptography, Obscurity, Pseudonym, Traceability,
Vehicular Adhoc Network
[1]. Maxim Raya and Jean-Pierre Hubaux, "Securing vehicular ad hoc networks," Journal of Computer
Security, vol. 15, no. 1, pp. 39–68, 2007.
|
||||||||
Ali Haghi, Hamid Simorgh |
||||||||
Some Results from the Investigation of Effects of Heat Treatment on Properties of Ni-Hard Cast Irons |
||||||||
The results of an investigation which was undertaken to reveal the differences in the mechanical
properties and microstructural characteristics of two types of Ni-hard cast irons are presented in this study. The
cast irons were obtained in a laboratory conditions and their compositions are in accordance with European
standard EN 12513. One type of cast iron is EN GJN-HV520 (Ni-hard 2) containing 2.10% Cr and the second
type EN GJN-HV600 (Ni-hard 4) with 9.04% Cr. The cast irons were evaluated in both as-cast and heat treated
conditions. To improve mechanical properties specifically wear resistance..............
white cast iron, Ni-hard, abrasion resistance, heat treatment.
[1]. www.classguss.de, Claas Guss, Technical Information, No 11.
|
||||||||
Hyemin Lee, Hyunsik Yoon |
||||||||
Design of Transparent Ratchet Arrays for Directional Transmission |
||||||||
Directional properties originated from asymmetric structures have known as useful tools for optical
devices, adhesives, and microfluidic devices. Recently, asymmetric transparent ratchet structures have proposed
to be an optical film for directional transmittance, which is transparent in one direction and opaque in the other
direction. Here, we study the ratchet design such as ratchet angles and tilted angles to optimize the
directionality. From the 3D printing methods, we fabricated asymmetric structures with different ratchet angles,
tilted angles, and replicated to transparent polymeric materials to be useful as an optical component. In addition,
we compared the results with optical simulation and they show a good agreement.
Ratchets, PDMS, 3D printing, optical simulation, directional transmission
[1]. P.,Vukusic, J. R. Sambles, C. R. Lawrence, and R. J. Wootton, Structural colour: Now you see it – now
you don't, Nature vol. 410, p 36, 2001. [3]. G. England, M. Kolle, P. Kim, M. Khan, P. Munoz, E. Mazur, and J. Aizenberg, Bioinspired
micrograting arrays mimicking the reverse color diffraction elements evolved by the butterfly Pierella
luna, Proc. Nat. Acad. Sci. vol. 111, pp. 15630–15634, 2014.
|
||||||||
Ruzica Manojlovic, Jarmila Trpcevska, Ordanche Petrov, Blagoj Rizov |
||||||||
Analysis of Medieval Mail Armour – Archaeological Remains from the Prilep Monastery Treskavec |
||||||||
In this paper, archaeological material, found in the Treskavec monastery, in Priler, Macedonia, was
analysed. In fact, the material is a large fragment of mail armour, made of rings, which, according to
archaeological findings, dates from the end of the 13th or the beginning of 14th century. The ring samples were
inspected by SEM, metallographic, EDX and X-ray analysis, and the obtained information was used to
determine the chemical composition, metallographic characterization, corrosion analysis, as well as the
metallurgical processes by which the rings were produced.
Mail armour, metallographic characterisation, corrosion, archaeology
[1]. V. Korać, M. Šuput, Architecture of the Byzantine World, Belgrade,1998 (in serbian).
|
||||||||
Dr.Thangam Palaniswamy, Dania Alfozan, Khadija Mughrbil, Roaa Felimban, Heba Gogandy |
||||||||
Keys to Improve Service Quality and Employee Performance In An Organization - A Survey |
||||||||
A literature review provides a clear map for any research work, to take the necessary actions in the
right directions to reach the possible solutions successfully. It lays foundation for the research work in either
collecting important information relevant to the research or avoiding issues irrelevant to the research. It can
represent which direction should be followed depending on previous researches and studies. This paper reveals
one such survey focussing on the various techniques that would maximize client satisfaction in an organization...............
Client Satisfaction, Service Quality, Employee Performance, Organization, Improvement.
[1]. W. Y. Wong and K. Y. T. Chan Wai Lee, "Six Sigma in IT Processes, IT Services and IT Products – A
Fact or a Fad?," in Six Sigma Beyond Manufacturing in IT Processes, IT Services and IT Products, 2012.
|
||||||||
